Hi there, This is Goutham From DIY blogger. We have come across with a simple and low cost DIY once again for you.
In this post you will know about how to create a robot with e-waste and plastic in just 5 minutes. So, let’s get into the topic.
Materials required :
1.Two small pvc pipes of required lenght
2.card board
3.Glue gun
4.Arduino Uno
5.servo motors
6.Ultrasonic sensors (optional)
Step 1 : Take the two pvc pipes of required length and Round the plaster around the pipes to get straightness while the robot is In standing position
Step 2 : Use glue with card board to cover the legs of the robot
Step 3 : Cut the cardboard as we did or else you can do as your wish.
Step : 4 Here comes the Major part.
Take the arduino and upload the below code into that. If you have any errors while uploading the code just contact us.
Step 5: Paste the glue to the servo motor and then stick those motors to the card board as we did.
Step 6 : To make eyes we have used Ultrasonic and this is not mandatory you can design as your wish.
Step 7 : Give the proper Connections
Step 8 : Take a snap and share it to your friends.😇😇😇
For better understanding you can watch this video..
For more :
Please visit our website and our YouTube channel
Links part…
You can also follow me on instagram
goutham@03_06
diyblogger 