How to make a Small robot at home

Hi there, This is Goutham From DIY blogger. We have come across with a simple and low cost DIY once again for you.

In this post you will know about how to create a robot with e-waste and plastic in just 5 minutes. So, let’s get into the topic.

Materials required :

1.Two small pvc pipes of required lenght

2.card board

3.Glue gun

4.Arduino Uno

5.servo motors

6.Ultrasonic sensors (optional)

Step 1 : Take the two pvc pipes of required length and Round the plaster around the pipes to get straightness while the robot is In standing position

Step 2 : Use glue with card board to cover the legs of the robot

Step 3 : Cut the cardboard as we did or else you can do as your wish.

Step : 4 Here comes the Major part.

Take the arduino and upload the below code into that. If you have any errors while uploading the code just contact us.

Step 5: Paste the glue to the servo motor and then stick those motors to the card board as we did.

Step 6 : To make eyes we have used Ultrasonic and this is not mandatory you can design as your wish.

Step 7 : Give the proper Connections

Step 8 : Take a snap and share it to your friends.😇😇😇

For better understanding you can watch this video..

For more :

Please visit our website and our YouTube channel

Links part…

You can also follow me on instagram

goutham@03_06